|
|
|
910.301 |
Set of 3 knives type Z10 HM, 8mm wide, 80 degr. dual edge, 50 degr. cut angle,
solid carbide, for knife holder type 1
heavy-duty knife for Lexan (up to 40 mil), cardboard, Diamond Grade reflectives,
pavement marking and other tough materials
|
108.00
(36.00 ea.) |
|
|
910.309 |
Set of 3 knives type Z11 HM, 8mm wide, 60 degr. dual edge, 60 degr. cut angle,
solid carbide, for knife holder type 1
heavy-duty knife for thicker Lexan , cardboard, Diamond Grade reflectives,
pavement marking and other tough materials
|
108.00
(36.00 ea.) |
|
|
910.320 |
Set of 3 knives type Z12 HM, 8mm wide, 80 degr. dual edge, 50 degr. cut angle,
solid carbide, 2-sided dual edge blade, for knife holder type 1
heavy-duty knife for Lexan (up to 40 mil), cardboard, Diamond Grade reflectives,
pavement marking and other tough materials
|
180.00
(60.00 ea.) |
|
|
910.321 |
Set of 3 knives type Z13 HM, 8mm wide, 60 degr. dual edge, 60 degr. cut angle,
solid carbide, 2-sided dual edge blade, for knife holder type 1
heavy-duty knife for thicker Lexan , cardboard, Diamond Grade reflectives,
pavement marking and other tough materials
|
180.00
(60.00 ea.) |
|
|
910.306 |
Set of 5 knives type Z16 HM, 6mm wide, 0.6mm thick, 35 degr. single edge,
55 degr. cut angle, used with knife holder type 3, also for EOT and POT
For cutting thin cardboard, Polyester, leather and fabric etc.
|
140.00
(28.00 ea.) |
|
|
910.307 |
Set of 5 knives type Z17 HM, 6mm wide, 0.6mm thick, 25 degr. single edge,
65 degr. cut angle, used with knife holder type 3, also for EOT and POT
For cutting cardboard, Polyester, leather and fabric etc.
|
140.00
(28.00 ea.) |
|
|
910.313 |
Set of 5 knives type Z20 HM, 5/25 degr., 25mm long
for POT-40
for cutting corrugated cardbord up to 10 mm, and rubber
|
140.00
(28.00 ea.) |
|
|
910.314 |
Set of 5 knives type Z21 HM, 5/25 degr., 28mm long
for POT-40
for cutting corrugated cardbord up to 13 mm, and rubber
|
140.00
(28.00 ea.) |
|
|
910.315 |
St of 5 knives type Z22 HM, 10/25 degr., 25mm long
for POT-40
for cutting hard cardbord up to 3 mm, and rubber
|
140.00
(28.00 ea.) |
|
|
910.318 |
Set of 5 knives type Z28 HM, 4/45 degr., 38mm long
for EOT-40 and POT-40
for cutting soft materials up to 23mm
(available on special request only (2 weeks delivery time) |
290.00
(58.00 ea.) |
|
|
00000.7264 |
Set of 10 blades, 5.6mm wide, 0.6mm thick, 50 degr. single edge, Martor Nr. 784
used instead of 506.281 Wild type 11 (60degr.), and 910.302 Zuend type 2 (45 degr.)
Super high-speed steel
for cutting soft materials, corrugated etc. in EOT and POT |
25.00
(min.10 boxes = $22.00/box) |
|
|
